Policolor portfolio includes, in addition to the basic products, also related products, necessary for the preparation of the surfaces on which the basic product is applied or necessary for the preparation of the basic product.
The related products category includes wood and metal primers, wall primers and thinners.
Fungicidal / yeasticide antibacterial disinfectant solution based on ISOPROPILIC alcohol (74%), used for hand hygiene and non-absorbent surfaces, with biocidal effect immediately after drying. Contains active substances: 74% Isopropanol and 2% ethyl alcohol and is according to WHO recommendations.
Antibacterial fungicidal / yeasticide disinfectant solution based on ETHYL alcohol (80%), used for hand hygiene and non-absorbent surfaces, with biocidal effect immediately after drying. It contains active substances: 80% ethyl alcohol and 2% isopropanol and is according to WHO recommendations.
Protection of metal surfaces exposed to heat, light and weather, having the ability to reflect solar radiation (tanks, cisterns) or decoration and protection of interior and exterior surfaces such as metal roofs, railings, metal. It can be used at a continuous temperature of 100°C and discontinuous temperature of 150°C.
Glossy lacquer used for finishing parquet and wooden flooring. It is a two-component product, which offers a high resistance in time for the surfaces it is applied on. It is used only in a mixture with Parcodur hardener.
Adhesion and protection primer for wooden surfaces, located indoors and outdoors. After applying the primer, the wood has triple protection: it is protected against rot, fungi, molds, algae, termites and other insects that attack the wood, humidity, temperature variations, its qualities being kept for a long period of time.
Primer that provides anticorrosive protection of interior and exterior metal surfaces exploited in mild corrosion conditions. It is used as the first layer in the system with alkyd enamels, ensuring the adhesion between the support and the enamel.
It is a last generation anti-mold solution tested in Troy laboratories. The solution has the following proven benefits, which develop a triple action:
It is a wall primer that effectively protects concrete surfaces and not only both inside and outside against: mold, bacteria, algae and fungi. Together with POLISEPT Anti – Mold Solution (if there are contaminated surfaces), SPOR with silver ions or SPOR bathroom and kitchen form an effective and long-lasting protection system of the surface against mold, fungi, bacteria etc.
It is used for interior and exterior surfaces as a first layer (for adjusting porosity and adhesion to the substrate) in the protection system with washable paints or decorative plasters (in the case of highly absorbent substrates).
Thinner used to bring to the application viscosity of solvent-based products: Policolor lacquers and enamels. It is also used for cleaning application equipment and for degreasing surfaces that will be protected with alkyd systems.
Solution used to remove rust and phosphating metal surfaces in order to apply a painting system; after application the surface forms a protective layer against rust.
Stripper used to remove old layers of enamel and paints applied to wood, metal and masonry. Old layers of alkyd, latex, alkyd-urethane, nitrocellulose and other coatings can be removed.
It is used to dilute the solvent-based product: Policolor varnishes and enamels, so as to obtain the optimum viscosity for application. It is also used for cleaning application equipment and for degreasing surfaces to be protected with alkyd systems.